5604 Line Scan Vision System Specifications

Specification 5604/5614
Minimum Firmware Requirement1 In-Sight version 4.4.3
Job/Program Memory 128MB non-volatile flash memory; unlimited storage using a remote network device.
Image Processing Memory 256MB SDRAM
Sensor Type 1-inch CCD
Sensor Properties 14.3 mm x 14µm active area, 14µm x 14µm sq. pixels.
Maximum Resolution (pixels) 1024 x 1 (CCD); 1024 x 8192 (up to 8192 lines for full resolution image).
Acquisition Line Scan integration.
Bit Depth 256 grey levels (8 bits/pixel)
Lines Per Second 44K lines per second.
Lens Type C-mount
Lens Cover View Port Material Clear plastic with an abrasion-resistant coating on the exterior side.
Trigger 1 opto-isolated, acquisition trigger input. Remote software commands via Ethernet and RS-232C.
Discrete Inputs None built-in. Additional inputs available using a compatible I/O module. (For more information, refer to I/O Modules.) Unlimited inputs when using an Ethernet I/O system.
Discrete Outputs 2 built-in, high-speed outputs. Additional outputs available using a compatible I/O module. (For more information, refer to I/O Modules.) Unlimited outputs when using an Ethernet I/O system.
Encoder Inputs 2 built-in, encoder inputs for use with a 24VDC signal.
Status LEDs Power, Network Status, Network Traffic, 2 user configurable.
Network Communication 1 Ethernet port, 10/100/1000 BaseT with auto MDIX. IEEE 802.3 TCP/IP protocol. Supports DHCP (factory default), static and link-local IP address configuration.
1588 Support

Timestamp Resolution: 8ns

Synchronization Accuracy Through Transparent Clock: 5µs

Serial Communication RS-232C when connected to compatible I/O module. (For more information, refer to I/O Modules.)
Power Consumption 24VDC ±10%, 600mA maximum.
Material Die-cast aluminum housing.
Finish Painted/Powder coat (back plate).
Mounting Eight M4 threaded mounting holes (four front and four back).
Dimensions

134.4mm (5.29in) x 124.1mm (4.88in) x 61.4mm (2.42in) with lens cover installed.

53.2mm (2.09in) x 124.1mm (4.88in) x 61.4mm (2.42in) without lens cover installed (includes Thread Guard).

Weight 585 g (20.6 oz.) Lens cover installed, without lens.
Operating Temperature (non-circulating air) 0°C to 45°C (32°F to 113°F)2
Operating Temperature (circulating air) 0°C to 50°C (32°F to 122°F)3
Storage Temperature -30°C to 80°C (-22°F to 176°F)
Humidity 95%, non-condensing (Operating and Storage)
Protection IP67 (with appropriate lens cover properly installed).
Shock (Shipping and Storage) 80 G Shock with 150 gram lens attached per IEC 68-2-27.
Vibration (Shipping and Storage) 10 G from 10-500 Hz with 150 gram lens per IEC 68-2-6.
Regulatory Compliance CE, FCC, KCC, TÜV SÜD NRTL, RoHS