I/O Modules

The following I/O modules are compatible with your vision system, and provide access to additional discrete inputs and outputs.

I/O Module Vision System Discrete Inputs Discrete Outputs
CIO-1400

All In-Sight 5000 series vision systems (except In-Sight 5604)

 7 general

2 high‑speed,
6 general
CIO-MICRO

All In-Sight 5000 series vision systems

 8 general

2 high‑speed,
8 general
CIO‑MICRO‑CC All In-Sight 5000 series vision systems (except In-Sight 5705, 5705C and 5715) 8 general

2 high‑speed,
8 general
Note:
  • The CIO-MICRO I/O module only supports In-Sight 5700 series vision systems with firmware version 5.3.0 and higher.
  • The CIO-MICRO and CIO-MICRO-CC I/O modules do not support Gigabit pass-through operation. If you need Gigabit operation when you use the In-Sight 5600 series or In-Sight 5700 series vision system, connect a LAN cable from a Gigabit Ethernet switch to the I/O module LAN port and connect the vision system Ethernet cable to the Gigabit Ethernet switch.
  • The CIO-MICRO & CIO-MICRO-CC I/O modules support In-Sight 5100 series and 5400 series vision systems with 128MB non-volatile flash memory or higher and support all In-Sight 5600 series vision systems.
  • The CIO-MICRO-CC I/O module also adds CC-link networking capability. For detailed connection information, see the In-Sight® CIO-MICRO and CIO-MICRO-CC I/O Module Installation Manual.