Toolbars: EasyBuilder View

EasyBuilder provides three toolbars that allow single-click access to common tasks. The Standard and Explorer toolbars can be hidden or shown using the View menu.

Note:

Customize EasyBuilder by moving and resizing the toolbars.
Icons appear grayed-out when their corresponding functions are not available in the current context.
Icons can be added and removed from individual toolbars. Click the right edge of the toolbar and select the Add or Remove Buttons menu, then enable or disable your desired icons.
You can enable large icons in the Options Dialog.

Standard Toolbar
	Load a blank, new job onto the active In-Sight sensor. Ensure that any desired changes have been saved in the previous job before creating a new job.
	Display the Open dialog. This allows you to load a local or remote job file as the active job onto an In-Sight sensor.
	Save the active job. If the job has not previously been saved, this button opens the Save As dialog. Otherwise, EasyBuilder will write the job contents to the current file name. For more information, see Save & Open Dialogs.
	Open the Print dialog to print the Results Table of the current job to a local or networked printer. For more information, see Print Dialog and Results Table.
	Open the Print Preview window to display a print preview of the Results Table of the current job. For more information, see Print Preview.
	Not available in EasyBuilder.
	Copy the selected tool or file(s) to the clipboard. Often used in conjunction with Paste.
	Paste the tool or file(s) that were copied.
	Delete the selected tool or file(s).
	Undo the last action.
	Redo the last action.
Job DisplayToolbar
	Go to the first image stored in the Playback folder.
	Go to the previous image stored in the Playback folder.
	Play back all images stored in the Playback folder.
	Pause playback of images stored in the Playback folder.
	Go to the next image stored in the Playback folder.
	Go to the last image stored in the Playback folder.
	Record acquired images to the Record folder.
	Stop the recording of acquired images to the Record folder.
	Open the Record/Playback Options dialog to configure the Record/Playback settings. For more information, see Record/Playback Options Dialog: EasyBuilder View.
Note: If the Record button is clicked during playback, the images being played back are recorded to the Record folder, Good folder or Bad folder, depending on the sorting parameters specified in the Record/Playback Options dialog. The images are recorded with the same name as the images stored in the Playback folder. To allow the playback of images when a sensor is in Online mode, the Trigger parameter in the Set Up Image step must be set to External, Manual or Network.
	Acquire one image from an In-Sight sensor (manual trigger).
	Enter Repeating Trigger mode, where images are continuously acquired in the display area to help you verify that your application is working as expected against live images.
	Enter Live Video mode, where images are continuously acquired from the In-Sight sensor and displayed in the display area.
	Increase the level of magnification on the image.
	Decrease the level of magnification on the image.
	Fit the image to the display area. The image will automatically scale to be maximally displayed in the display area, with the entire image visible. The image's original aspect ratio is maintained; some empty (grey) space may exist around the image.
	Rotate the image 90° clockwise.
	Enable/disable the highlighting of pixels in the image with a grey level less than or equal to the Low Saturation Level (in blue) and greater than or equal to the High Saturation Level (in red). For more information, see Image Display Panel.
	Open the HMI View Selection dialog to specify the Run Mode views that are visible to the user from the HMI application and the order of the views when you click the Switch View button in the HMI application. For more information, see HMI View Selection Dialog.
	Resize the image region graphic so that it equals the size of the display area. This button is enabled only when the job contains a tool that has an associated region graphic and the Locate Part or Inspect Part step is selected.
	Show/hide selected tool graphics only.
	As the image is zoomed in or out, the graphic overlay text is scaled proportionally with the image. (default) This setting is applied to all graphic overlay text and is not saved to the job file.
	As the image is zoomed out, the scale of the graphic overlay text is decreased. As the image is zoomed in, if the graphic overlay text is smaller than the default font size (9 point), the scale of the graphic overlay text is increased until it reaches the default font size.
	The graphic overlay text is a fixed size, regardless of the image zoom level. This setting is applied to all graphic overlay text and is not saved to the job file.
	Show/hide the filmstrip.
	Show/hide the Focus Metric.
	Toggle the Online/Offline state of the active In-Sight sensor.
Explorer Toolbar
	View the In-Sight Network pane. For more information, see In-Sight Network.
	View the In-Sight Files pane. For more information, see In-Sight Files.
	View the Palette. For more information, see Palette: EasyBuilder View.
	Set the user name and password to use when logging on to In-Sight sensors. For more information, see Log On/Off Dialog.
	Generate an HTML or XML report containing job and network details for one or more In-Sight sensors. For more information, see Create Report Dialog.
	Back up jobs and sensor settings for one or more In-Sight sensors. For more information, see Backup Dialog.
	Restore jobs and sensor settings for one or more In-Sight sensors. For more information, see Restore Dialog.
	Open the Add Sensor/Device to Network dialog. For more information, see Add Sensor/Device to Network Dialog.
	Access In-Sight Explorer Help.
	Access Online Support at cognex.com/support/insight.