使用外观瑕疵检测工具输入/输出属性使用外观瑕疵检测工具输入/输出属性下表列出工具的属性（输入参数和输出结果），包括工具的符号名称、数据类型以及是否可用于 OPC 通信、EasyView 项目以及外部设备的输入和/或输出数据。
| 符号名称 | 数据类型 | OPC | EasyView | 输入/输出数据 |
|---|---|---|---|---|
| Automatic_Smoothing | I | X | X | In/Out |
| Composite_Region | A | X | ||
| Cumulative_Flaw_Size | FP | X | X | In/Out |
| Description | S | X | X | In/Out |
| Detection_Axis | I | X | X | In/Out |
| Detection_Size | I | X | X | In/Out |
| Display_Image | I | X | X | In/Out |
| Enable_Mask | I | X | X | In/Out |
| Erode_Mask_Count | I | X | X | In/Out |
| Error_Count | I | X | X | Out |
| Execution_Time | FP | X | X | Out |
| Fail | I | X | ||
| Fail_Count | I | X | X | Out |
| Detection_Type | I | X | X | In/Out |
| Include_In_Job_Pass | I | X | X | In/Out |
| Invert | I | X | X | In/Out |
| Mask_Display_Image | I | X | X | In/Out |
| Mask_Method | I | X | X | In/Out |
| Mask_Smoothing_Factor | I | X | X | In/Out |
| Maximum_Flaw_Area | FP | X | X | In/Out |
| Maximum_Hole_Fill_Size | I | X | X | In/Out |
| Median_Kernel_Size | I | X | X | In/Out |
| Minimum_Contrast | I | X | X | In/Out |
| Minimum_Edge_Contrast | I | X | X | In/Out |
| Minimum_Flaw_Area | FP | X | X | In/Out |
| Minimum_Segment_Size | I | X | X | In/Out |
| Pass | I | X | ||
| Pass_Count | I | X | X | Out |
| Sampling_Factor | I | X | X | In/Out |
| Smoothing_Factor | I | X | X | In/Out |
| Status | I | X | X | Out |
| Timeout | I | X | X | In/Out |
| Tool_Enabled | I | X | X | In/Out |
| Tool_Enabled_Status | I | X | X | Out |
| Total_Flaws | S | X | X | Out |
| Train_Mask | A | X |
符号名称