Enumeration that describes which degrees of freedom (DOF) are enabled for an interactive CircularAnnulusSection. You can OR these constants to combine different degrees of freedom.
Assembly: Cognex.Vision.Core.Net (in Cognex.Vision.Core.Net.dll) Version: 9.25.1.0
| Member name | Value | Description | |
|---|---|---|---|
| None | 0 | Disables interactive manipulation of all degrees of freedom of the circular annulus section. | |
| SectionSpan | 1 | Enables interactive manipulation of the circular annulus section's span up to two Pi. | |
| EndPoints | 2 | Enables interactive manipulation of the circular annulus section's center arc end points, keeping the section height and opposite center arc end point constant. This typically modifies all geometric properties of the circular annulus section. | |
| Bend | 4 | Enables interactive manipulation of the circular annulus section's curvature, keeping the two center arc end points constant. This typically modifies all geometric properties of the circular annulus section. | |
| Radii | 8 | Enables interactive manipulation of the circular annulus section's start and end arcs radii, keeping the opposite arc's radius a constant. These handles modify the Radius and RadialScale properties of the circular annulus section. | |
| SectionSpanFourPi | 32 | Extends interactive manipulation of the circular annulus section's span up to four Pi. Note that if SectionSpan is not enabled, this DOF setting has no effect. | |
| CornerPoints | 256 | Enables interactive manipulation of the circular annulus section's four corner points, by adjusting angular span and radii. | |
| BendEnds | 512 | Enables interactive manipulation of the circular annulus section's curvature, keeping the center arc midpoint and length constant. This typically modifies all geometric properties of the circular annulus section. | |
| Rotation | 1024 | Enables interactive manipulation of the rotation of the circular annulus section, around either the midpoint of the center arc, or the center of the section, depending on angular span. This typically modifies all geometric properties of the circular annulus section. | |
| Position | 2147483648 | Enables interactive manipulation of the X,Y position of the circular annulus section's center. | |
| All | 4294967295 | Enables interactive manipulation of all degrees of freedom of the circular annulus section. |