CogAcqLineScan.MaximumLineFrequency Property

CogAcqLineScan MaximumLineFrequency Property

Cognex VisionPro 9.8 SR1

The maximum frequency at which lines can be acquired before encoder overrun errors begin to occur.

Namespace: Cognex.VisionPro.Implementation.Internal
Assembly: Cognex.VisionPro.Core (in Cognex.VisionPro.Core.dll) Version: 75.0.0.0

Syntax

C++

Copy to Clipboard Print

public virtual double MaximumLineFrequency { get; }

public virtual double MaximumLineFrequency { get; }

Public Overridable ReadOnly Property MaximumLineFrequency As Double 
	Get

Public Overridable ReadOnly Property MaximumLineFrequency As Double 
	Get

public:
virtual property double MaximumLineFrequency {
	double get ();
}

public:
virtual property double MaximumLineFrequency {
	double get ();
}

Property Value

Type: Double
The maximum frequency, measured in camera lines per second.

Implements

ICogAcqLineScan MaximumLineFrequency

Remarks

This value will change with different encoder and camera settings, particularly exposure. It may also change between camera models and firmware versions. Finally, it is an approximate limit, and the exact frequency at which overruns occur will vary slightly based on the data content of the image.