CogCircularAnnulusSection PropertiesCognex VisionPro 9.8

The CogCircularAnnulusSection type exposes the following members.

Properties

  NameDescription
Public propertyAngleSpan
Returns/sets the angle span (in radians) of this annulus section. Note that this can be positive or negative, and implies arc direction.
Public propertyAngleStart
Returns/sets the starting angle (in radians) of this annulus section.
Public propertyArcDirectionAdornment
Returns/sets the arc direction adornment of this annulus section.
Public propertyArea
Returns the area enclosed by this circular annulus section.
Public propertyCenterArcAdornment
Returns/sets the center arc adornment of this annulus section.
Public propertyCenterX
Returns/sets the X coordinate of the center of the circle defined by this circular annulus section.
Public propertyCenterY
Returns/sets the Y coordinate of the center of the circle defined by this circular annulus section.
Public propertyChangedEventSuspended
If nonzero, indicates that the raising of the Changed event has been suspended. This value is incremented when SuspendChangedEvent is called and decremented when ResumeAndRaiseChangedEvent is called.
Public propertyChildren
Children of this graphic.
Public propertyColor
Color of this graphic. Can be any OLE_COLOR.
Public propertyDragColor
Color of this graphic when dragged.
Public propertyDragLineStyle
Line style of this graphic when dragged.
Public propertyDragLineWidthInScreenPixels
Line width of this graphic when dragged.
Public propertyGraphicDOFEnable
Interactive Degree of freedom for this graphic object. Provides the ability to govern interactive manipulation of an object; for example could be used to prevent an object from being resized.
Public propertyGraphicDOFEnableBase
Interactive Degree of freedom for a graphic object. Allows access to each graphic's GraphicDOFEnable property without knowing the specific graphic type.
Public propertyHasChanged
If true, the serializable state of this object has changed since the last time it was serialized.
Public propertyInteractive
Interactive property allow this graphic object to be selected. See GraphicDOFEnable for information on governing interactive manipulation of an object.
Public propertyLineStyle
Line style of this graphic.
Public propertyLineWidthInScreenPixels
Line width (in screen pixels) of this graphic.
Public propertyManipArcFraction
Returns/sets the fractional distance (between the start and end arcs) where the manipulation arc is drawn. During interactive manipulation, the shape usually resets this fraction to 0.5 but users may reset it sooner if they desire.
Public propertyMouseCursor
Mouse cursor to be displayed when the mouse is over the graphic. The cursor will be visible only if the graphic is interactive.
Public propertyParent
Parent of this graphic.
Public propertyPerimeter
Returns the perimeter length of this circular annulus section.
Public propertyRadialDirectionAdornment
Returns/sets the radial direction adornment of this annulus section.
Public propertyRadialScale
Returns/sets the radial scale of this annular section. Note that this can be less than or greater than 1 (but not equal to 1, and not <=0) and therefore implies a radial direction.
Public propertyRadius
Returns/sets the Radius of the start arc of this annulus section. Note this could be either the inner arc or the outer arc depending on whether RadialScale is greater than or less than 1.0.
Public propertySelected
True when the shape is selected in a display.
Public propertySelectedColor
Color of this graphic when selected.
Public propertySelectedLineStyle
Line style of this graphic when selected.
Public propertySelectedLineWidthInScreenPixels
Line width of this graphic when selected.
Public propertySelectedSpaceName
Coordinate space in which this shape is to be interpreted.
Public propertyTipText
Text to describe this graphic in a tool tip.
Public propertyVisible
Visible property of this graphic.
Top
See Also