CogAcqLineScan.MotionInput Property

CogAcqLineScan MotionInput Property

Cognex VisionPro 9.8

The motion input for a linescan acquisition. This value controls whether linescan acquisition is performed using a hardware encoder or the test encoder.

Namespace: Cognex.VisionPro.Implementation.Internal
Assembly: Cognex.VisionPro.Core (in Cognex.VisionPro.Core.dll) Version: 75.1.0.0

Syntax

C++

Copy to Clipboard Print

public virtual CogMotionInputConstants MotionInput { get; set; }

public virtual CogMotionInputConstants MotionInput { get; set; }

Public Overridable Property MotionInput As CogMotionInputConstants 
	Get 
	Set

Public Overridable Property MotionInput As CogMotionInputConstants 
	Get 
	Set

public:
virtual property CogMotionInputConstants MotionInput {
	CogMotionInputConstants get ();
	void set (CogMotionInputConstants value);
}

public:
virtual property CogMotionInputConstants MotionInput {
	CogMotionInputConstants get ();
	void set (CogMotionInputConstants value);
}

Property Value

Type: CogMotionInputConstants
The type of motion input. The default value for a DS1000 or L4000 series camera is Encoderless. Otherwise, it is Legacy.

Implements

ICogAcqLineScan MotionInput

Exceptions

Exception	Condition
ArgumentOutOfRangeException	If you have a DS1000 or L4000 series camera and the supplied mode is Legacy or if you do not have a DS1000 or L4000 series camera and the supplied mode is anything other than Legacy.