CogAcqProfileCamera Class

Cognex VisionPro

Inheritance Hierarchy

System Object
  System MarshalByRefObject
    Cognex.VisionPro.Implementation CogObjectBase
      Cognex.VisionPro.Implementation CogSerializableObjectBase
        Cognex.VisionPro.Implementation.Internal CogAcqProfileCamera

Namespace: Cognex.VisionPro.Implementation.Internal
Assembly: Cognex.VisionPro.Core (in Cognex.VisionPro.Core.dll) Version: 65.1.0.0

Syntax

C++

Copy to Clipboard Print

[SerializableAttribute]
public class CogAcqProfileCamera : CogSerializableObjectBase, 
	ICogAcqProfileCamera, IDeserializationCallback, IDisposable

[SerializableAttribute]
public class CogAcqProfileCamera : CogSerializableObjectBase, 
	ICogAcqProfileCamera, IDeserializationCallback, IDisposable

<SerializableAttribute>
Public Class CogAcqProfileCamera 
	Inherits CogSerializableObjectBase 
	Implements ICogAcqProfileCamera, IDeserializationCallback, IDisposable

<SerializableAttribute>
Public Class CogAcqProfileCamera 
	Inherits CogSerializableObjectBase 
	Implements ICogAcqProfileCamera, IDeserializationCallback, IDisposable

[SerializableAttribute]
public ref class CogAcqProfileCamera : public CogSerializableObjectBase, 
	ICogAcqProfileCamera, IDeserializationCallback, IDisposable

[SerializableAttribute]
public ref class CogAcqProfileCamera : public CogSerializableObjectBase, 
	ICogAcqProfileCamera, IDeserializationCallback, IDisposable

The CogAcqProfileCamera type exposes the following members.

Constructors

	Name	Description
	CogAcqProfileCamera(IntPtr)
	CogAcqProfileCamera(SerializationInfo, StreamingContext)

Top

Methods

	Name	Description
	CreateObjRef	Creates an object that contains all the relevant information required to generate a proxy used to communicate with a remote object. (Inherited from MarshalByRefObject.)
	Dispose
	Dispose(Boolean)
	Equals	Determines whether the specified Object is equal to the current Object. (Inherited from Object.)
	Finalize	(Overrides Object Finalize .)
	GetAttributes	Implements the corresponding member of the ICustomTypeDescriptor interface. May be overridden in derived classes to provide custom type information. (Inherited from CogObjectBase.)
	GetClassName	Implements the corresponding member of the ICustomTypeDescriptor interface. May be overridden in derived classes to provide custom type information. (Inherited from CogObjectBase.)
	GetComponentName	Implements the corresponding member of the ICustomTypeDescriptor interface. May be overridden in derived classes to provide custom type information. (Inherited from CogObjectBase.)
	GetConverter	Implements the corresponding member of the ICustomTypeDescriptor interface. May be overridden in derived classes to provide custom type information. (Inherited from CogObjectBase.)
	GetDefaultEvent	Implements the corresponding member of the ICustomTypeDescriptor interface. May be overridden in derived classes to provide custom type information. (Inherited from CogObjectBase.)
	GetDefaultProperty	Implements the corresponding member of the ICustomTypeDescriptor interface. May be overridden in derived classes to provide custom type information. (Inherited from CogObjectBase.)
	GetEditor	Implements the corresponding member of the ICustomTypeDescriptor interface. May be overridden in derived classes to provide custom type information. (Inherited from CogObjectBase.)
	GetEvents	Implements the corresponding member of the ICustomTypeDescriptor interface. May be overridden in derived classes to provide custom type information. (Inherited from CogObjectBase.)
	GetEvents( Attribute )	Implements the corresponding member of the ICustomTypeDescriptor interface. May be overridden in derived classes to provide custom type information. (Inherited from CogObjectBase.)
	GetHashCode	Serves as a hash function for a particular type. (Inherited from Object.)
	GetLifetimeService	Retrieves the current lifetime service object that controls the lifetime policy for this instance. (Inherited from MarshalByRefObject.)
	GetObjectData	(Overrides CogSerializableObjectBase GetObjectData(SerializationInfo, StreamingContext).)
	GetProperties	Implements the corresponding member of the ICustomTypeDescriptor interface. May be overridden in derived classes to provide custom type information. (Inherited from CogObjectBase.)
	GetProperties( Attribute )	Implements the corresponding member of the ICustomTypeDescriptor interface. May be overridden in derived classes to provide custom type information. (Inherited from CogObjectBase.)
	GetPropertyOwner	Implements the corresponding member of the ICustomTypeDescriptor interface. May be overridden in derived classes to provide custom type information. (Inherited from CogObjectBase.)
	GetType	Gets the Type of the current instance. (Inherited from Object.)
	InitializeLifetimeService	Obtains a lifetime service object to control the lifetime policy for this instance. (Inherited from MarshalByRefObject.)
	MemberwiseClone	Creates a shallow copy of the current Object. (Inherited from Object.)
	MemberwiseClone(Boolean)	Creates a shallow copy of the current MarshalByRefObject object. (Inherited from MarshalByRefObject.)
	Set2ZDetectionZones	Sets the dimensions of two detection zones simulataneoulsy.
	ToString	Returns a String that represents the current Object. (Inherited from Object.)

Top

Properties

	Name	Description
	BinarizationThreshold	Reads or sets the Binarization Threshold pixel value when Binary laser detection mode is selected.
	BridgeDetectionZones	When true, the enabled detection zones are combined into a single zone starting at the bottom of the lowest zone and ending at the top of the highest zone. The ZDetectionSampling setting from Zone 1 is used for the entire combined zone.
	CameraMode	Reads or sets the operational mode of the camera. The camera mode setting will affect the type of image acquired. Intensity and IntensityWithGraphics images are intended for diagnostic purposes only. Range is for calibrated height profile images. Default mode is IntensityWithGraphics.
	DetectionSensitivity	Reads or sets the sensitivity of the laser detection. A higher value makes the laser easier to find and allows a lower exposure setting, which in turn allows a higher line rate. A lower value will prevent mistaking noise for the laser in areas where the laser is obscured.
	DetectionSensitivityMax	Defines the maximum threshold used for detecting the laser. Maximum value will vary with camera model and firmware version.
	HighDynamicRange	Read or sets high dynamic range operation. When enabled, the camera uses multiple exposures to increase the dynamic range. This is useful when the laser line passes over both dark and highly reflective regions. Enabling high dynamic range will reduce the maximum line rate. Default value is False.
	LaserDetectionMode	Determines the tradeoff between maximum speed and accuracy of the laser detection algorithm.
	LaserMode	Reads or sets the mode of the laser. Default is Strobed. Laser is on when an image is acquired. "On" and "Off" are intended for setup and diagnostic purposes only.
	LinkDetectionZones	When true, the base of Zone 2 is linked to the top of Zone 1, such that changes to Zone 1 will automatically make a corresponding adjustment to Zone 2. This is useful when adjusting the distance between the camera and the object being imaged, as both zones can adjusted by changing only the Zone 1 base. Note that as the LinkDetectionZones setting is turned on and off, the value of zDetectionBase2 will automatically toggle between an absolute and relative value.
	MinimumBinarizationLineWidth	Reads or sets the Minimum Binarization Linewidth when Binary laser detection mode is selected.
	PeakDetectionMode	Reads or sets the selection for laser peak detection.
	TriggerSignal	Get or set the trigger signal. May be either Opto or Differential.
	TriggerType	Selects the triggering behavior of the camera.
	ZDetectionBase	Reads or sets the area of the sensor used for laser detection. ZDetectionBase is the distance, in mm, relative to the camera defined origin of the Z axis, where the first detection range begins. When converting ZDetectionBase to discrete sensor rows, the range may be expanded slightly to match the sensor capabilities. The range will only be reduced if it extends off the end of the sensor. This function can be used to ignore reflections and other artifacts that are outside the expected range of heights.
	ZDetectionBase2	Reads or sets the area of the sensor used for laser detection. ZDetectionBase2 is the distance, in mm, where the detection range begins. The value is relative to either the top of the first detection zone if LinkDetectionZones is true and the first zone is enabled, or the camera defined origin of the Z axis otherwise. When converting ZDetectionBase2 to discrete sensor rows, the range may be expanded slightly to match the sensor capabilities. The range will only be reduced if it extends off the end of the sensor. This function can be used to ignore reflections and other artifacts that are outside the expected range of heights.
	ZDetectionEnable	Enables or disables the first detection zone.
	ZDetectionEnable2	Enables or disables the second detection zone.
	ZDetectionHeight	Reads or sets the area of the sensor used for laser detection. ZDetectionHeight is the height, in mm, of the first detection range stating at ZDetectionBase. A smaller ZDetectionHeight increases the maximum line rate when acquiring range images, but reduces the measurement range. When converting ZDetectionHeight to discrete sensor rows, the range may be expanded slightly to match the sensor capabilities. The range will only be reduced if it extends off the end of the sensor. This function can be used to ignore reflections and other artifacts that are outside the expected range of heights.
	ZDetectionHeight2	Reads or sets the area of the sensor used for laser detection. ZDetectionHeight2 is the height, in mm, of the second detection range starting at ZDetectionBase2. A smaller ZDetectionHeight2 increases the maximum line rate when acquiring range images, but reduces the measurement range. When converting ZDetectionHeight2 to discrete sensor rows, the range may be expanded slightly to match the sensor capabilities. The range will only be reduced if it extends off the end of the sensor. This function can be used to ignore reflections and other artifacts that are outside the expected range of heights.
	ZDetectionHeightMax	Defines the maximum range of heights (in mm) that can be specified via the ZDetection settings.
	ZDetectionSampling	Reads or sets the number of rows used for laser finding to be reduced. 1 processes every row, 2 processes every other row. Increasing ZDetectionSampling increases the maximum line rate when acquiring range images, but reduces the measurement precision. The increase in maximum line rate is in addition to the increase associated with adjusting ZDetectionBase and ZDetectionHeight. Default value is 1.
	ZDetectionSampling2	Reads or sets the number of rows used for laser finding to be reduced in detection zone 2. 1 processes every row, 2 processes every other row. Increasing ZDetectionSampling increases the maximum line rate when acquiring range images, but reduces the measurement precision. The increase in maximum line rate is in addition to the increase associated with adjusting ZDetectionBase and ZDetectionHeight. Default value is 1.
	ZDetectionSamplingMax	Defines the maximum number of rows can be reduced.

Top