Reads or sets the area of the sensor used for laser detection. ZDetectionHeight2 is the height, in mm, of the second detection range starting at ZDetectionBase2. A smaller ZDetectionHeight2 increases the maximum line rate when acquiring range images, but reduces the measurement range. When converting ZDetectionHeight2 to discrete sensor rows, the range may be expanded slightly to match the sensor capabilities. The range will only be reduced if it extends off the end of the sensor. This function can be used to ignore reflections and other artifacts that are outside the expected range of heights.

double ZDetectionHeight2 { get; set; }

double ZDetectionHeight2 { get; set; }

Property ZDetectionHeight2 As Double 
	Get 
	Set

Property ZDetectionHeight2 As Double 
	Get 
	Set

property double ZDetectionHeight2 {
	double get ();
	void set (double value);
}

property double ZDetectionHeight2 {
	double get ();
	void set (double value);
}