Cog3DRangeImageCrossSectionExtractPoint.Execute Method

Cog3DRangeImageCrossSectionExtractPoint Execute Method

Cognex VisionPro

Extracts a point.

Namespace: Cognex.VisionPro3D
Assembly: Cognex.VisionPro3D (in Cognex.VisionPro3D.dll) Version: 65.1.0.0

Syntax

public override void Execute(
	Cog3DRangeImageCrossSectionProfile profile
)

public override void Execute(
	Cog3DRangeImageCrossSectionProfile profile
)

Public Overrides Sub Execute ( 
	profile As Cog3DRangeImageCrossSectionProfile
)

Public Overrides Sub Execute ( 
	profile As Cog3DRangeImageCrossSectionProfile
)

public:
virtual void Execute(
	Cog3DRangeImageCrossSectionProfile^ profile
) override

public:
virtual void Execute(
	Cog3DRangeImageCrossSectionProfile^ profile
) override

profile: Type: Cognex.VisionPro3D Cog3DRangeImageCrossSectionProfile
The point is extracted and reported in the profile selected space name.

Events

Event Type	Reason
Cognex.VisionPro ICogChangedEvent	Fires when this method is called. The following state flag may be affected: SfStatus SfPoint SfPointInImage SfPointInImage3D

Event Type

Reason

Fires when this method is called.

The following state flag may be affected:

Exceptions

Exception	Condition
CogSecurityViolationException	If licensing for this class cannot be confirmed.
ArgumentException	If the regions selected space name was not found in the profile space tree.

Remarks

The status returned can be one of the following:

The point was extracted successfully and passed any enabled tolerance checking. Passed
The point was extracted successfully but failed tolerance checking FailedTolerance
The point was not extracted. FeatureNoExtracted