Cog3DRangeImageCrossSectionAreaOperatorBase.Execute Method

Cog3DRangeImageCrossSectionAreaOperatorBase Execute Method

Cognex VisionPro

Compute the area between the input profile and the reference profile.

Namespace: Cognex.VisionPro3D
Assembly: Cognex.VisionPro3D (in Cognex.VisionPro3D.dll) Version: 65.1.0.0

Syntax

public override sealed void Execute(
	Cog3DRangeImageCrossSectionProfile profile
)

public override sealed void Execute(
	Cog3DRangeImageCrossSectionProfile profile
)

Public Overrides NotOverridable Sub Execute ( 
	profile As Cog3DRangeImageCrossSectionProfile
)

Public Overrides NotOverridable Sub Execute ( 
	profile As Cog3DRangeImageCrossSectionProfile
)

public:
virtual void Execute(
	Cog3DRangeImageCrossSectionProfile^ profile
) override sealed

public:
virtual void Execute(
	Cog3DRangeImageCrossSectionProfile^ profile
) override sealed

profile: Type: Cognex.VisionPro3D Cog3DRangeImageCrossSectionProfile
The area and the points of interest and reported in the profile selected space name.

Events

Event Type	Reason
ICogChangedEvent Changed	Fires when this method is called. The following state flag may be affected: SfStatus

Event Type

Reason

Fires when this method is called.

The following state flag may be affected:

Exceptions

Exception	Condition
CogSecurityViolationException	If licensing for this class cannot be confirmed.
ArgumentException	If the regions selected space name was not found in the profile space tree.

Remarks

The status returned can be one of the following:

The measurement was successful and passed any enabled tolerance checking. Passed
The measurement was successful but failed tolerance checking FailedTolerance
The measurement was not successful for any reason. FailedToMeasure