If nonzero, indicates that the raising of the Changed event has been suspended. This value is incremented when SuspendChangedEvent is called and decremented when ResumeAndRaiseChangedEvent is called.

Specify the desired ouputput by bitwise ORing the appropriate Cog3DVisionDataStitchOutputConstants.

How to scale the output range image. This controls the resolution of the output range image. There are three defined modes: UseXYZScales and UseInputImageScales and UseFirstInputImageScales.

Client space (OutputSpaceName3D) maximum X bounds for the output range image. Ignored if OutputImageXYMode is not Limit. Note that setting this value to less than the current OutputImageXMin will cause OutputImageXMin to be set to the new value as well.

Client space (OutputSpaceName3D) minimum X bounds for the output range image. Ignored if OutputImageXYMode is not Limit. Note that setting this value to greater than the current OutputImageXMax will cause OutputImageXMax to be set to the new value as well.

The X scale factor to use when generating the output range image. Ignored when OutputImageScaleMode is UseInputImageScales or UseFirstInputImageScales.

How to define the X, Y bounds of the output image. There are two defined modes: Limit and Auto.

Client space (OutputSpaceName3D) maximum Y bounds for the output range image. Ignored if OutputImageXYMode is not Limit. Note that setting this value to less than the current OutputImageYMin will cause OutputImageYMin to be set to the new value as well.

Client space (OutputSpaceName3D) minimum Y bounds for the output range image. Ignored if OutputImageXYMode is not Limit. Note that setting this value to greater than the current OutputImageYMax will cause OutputImageYMax to be set to the new value as well.

The Y scale factor to use when generating the output range image. Ignored when OutputImageScaleMode is UseInputImageScales or UseFirstInputImageScales.

The maximum allowable Z difference in client space (OutputSpaceName3D) between adjacent source data positions, between which range image voxels will be interpolated. Adjacencies whose Z difference exceeds this value will be disconnected. If OutputImageZContinuityThresholdEnabled is false then this property is ignored and processing is performed as if this value were set to MaxValue).

Controls whether OutputImageZContinuityThreshold is used during processing. If false, processing is performed as if the threshold were set to MaxValue).

Client space (OutputSpaceName3D) minimum Z. If OutputImageZMode is UseZMin, then this parameter will be the output space Z that corresponds to a minimum output pixel value. This parameter is ignored if OutputImageZMode is not UseZMin.

How to handle the Z values of the output range image. There are two defined modes: UseZMin and Auto.

The Z scale factor to use when generating the output range image. Ignored when OutputImageScaleMode is UseInputImageScales or UseFirstInputImageScales.

The name of the 3D space in which the output range image will be rerendered. The Execute  method will throw an ArgumentException if this space name does not exist within the 3D coordinate space tree of the input range image.

Returns the complete set of state flags supported on this object. The flags may be indexed by name as shown in the following C# code snippet: if (changedObject.StateFlags["Color"] & eventArgs.StateFlags) { ... }