[SerializableAttribute]
public class CogBeadInspectDefect : CogSerializableObjectBase, 
	IDisposable

[SerializableAttribute]
public class CogBeadInspectDefect : CogSerializableObjectBase, 
	IDisposable

<SerializableAttribute>
Public Class CogBeadInspectDefect 
	Inherits CogSerializableObjectBase 
	Implements IDisposable

<SerializableAttribute>
Public Class CogBeadInspectDefect 
	Inherits CogSerializableObjectBase 
	Implements IDisposable

[SerializableAttribute]
public ref class CogBeadInspectDefect : public CogSerializableObjectBase, 
	IDisposable

[SerializableAttribute]
public ref class CogBeadInspectDefect : public CogSerializableObjectBase, 
	IDisposable

The CogBeadInspectDefect type exposes the following members.

	Name	Description
	CogBeadInspectDefect(CogBeadInspectDefect)	Constructs a deep copy of the supplied CogBeadInspectDefect object.
	CogBeadInspectDefect(SerializationInfo, StreamingContext)	Serialization constructor for CogBeadInspectDefect object.

	Name	Description
	CreateObjRef	Creates an object that contains all the relevant information required to generate a proxy used to communicate with a remote object. (Inherited from MarshalByRefObject.)
	Dispose	Releases all resources used by this CogBeadInspectDefect object.
	Dispose(Boolean)
	Equals	Determines whether the specified Object is equal to the current Object. (Inherited from Object.)
	Finalize	Releases all unmanaged resources used by this CogBeadInspectDefect object. (Overrides Object Finalize .)
	GetAttributes	Implements the corresponding member of the ICustomTypeDescriptor interface. May be overridden in derived classes to provide custom type information. (Inherited from CogObjectBase.)
	GetClassName	Implements the corresponding member of the ICustomTypeDescriptor interface. May be overridden in derived classes to provide custom type information. (Inherited from CogObjectBase.)
	GetComponentName	Implements the corresponding member of the ICustomTypeDescriptor interface. May be overridden in derived classes to provide custom type information. (Inherited from CogObjectBase.)
	GetConverter	Implements the corresponding member of the ICustomTypeDescriptor interface. May be overridden in derived classes to provide custom type information. (Inherited from CogObjectBase.)
	GetDefaultEvent	Implements the corresponding member of the ICustomTypeDescriptor interface. May be overridden in derived classes to provide custom type information. (Inherited from CogObjectBase.)
	GetDefaultProperty	Implements the corresponding member of the ICustomTypeDescriptor interface. May be overridden in derived classes to provide custom type information. (Inherited from CogObjectBase.)
	GetEditor	Implements the corresponding member of the ICustomTypeDescriptor interface. May be overridden in derived classes to provide custom type information. (Inherited from CogObjectBase.)
	GetEvents	Implements the corresponding member of the ICustomTypeDescriptor interface. May be overridden in derived classes to provide custom type information. (Inherited from CogObjectBase.)
	GetEvents( Attribute )	Implements the corresponding member of the ICustomTypeDescriptor interface. May be overridden in derived classes to provide custom type information. (Inherited from CogObjectBase.)
	GetHashCode	Serves as a hash function for a particular type. (Inherited from Object.)
	GetLifetimeService	Retrieves the current lifetime service object that controls the lifetime policy for this instance. (Inherited from MarshalByRefObject.)
	GetObjectData	Populates the provided SerializationInfo with the data needed to serialize the object. (Overrides CogSerializableObjectBase GetObjectData(SerializationInfo, StreamingContext).)
	GetProperties	Implements the corresponding member of the ICustomTypeDescriptor interface. May be overridden in derived classes to provide custom type information. (Inherited from CogObjectBase.)
	GetProperties( Attribute )	Implements the corresponding member of the ICustomTypeDescriptor interface. May be overridden in derived classes to provide custom type information. (Inherited from CogObjectBase.)
	GetPropertyOwner	Implements the corresponding member of the ICustomTypeDescriptor interface. May be overridden in derived classes to provide custom type information. (Inherited from CogObjectBase.)
	GetType	Gets the Type of the current instance. (Inherited from Object.)
	InitializeLifetimeService	Obtains a lifetime service object to control the lifetime policy for this instance. (Inherited from MarshalByRefObject.)
	MemberwiseClone	Creates a shallow copy of the current Object. (Inherited from Object.)
	MemberwiseClone(Boolean)	Creates a shallow copy of the current MarshalByRefObject object. (Inherited from MarshalByRefObject.)
	ToString	Returns a String that represents the current Object. (Inherited from Object.)

	Name	Description
	Area	Gets the area of the bead path where the defect was detected. The area is defined by summing the bead widths within the defect. This area is specified in units defined by the image's SelectedSpaceName.
	Bounds	Gets the bounding box of the defect. The bounding box encloses the segment of the bead path where the defect is present, and all of the calipers that compise that defect. This box is specified in units defined by the image's SelectedSpaceName.
	CoverageAvg	Get the average coverage ratio measured by the calipers of this defect.
	CoverageMax	Get the maximum coverage ratio measured by the calipers of this defect.
	CoverageMin	Get the minimum coverage ratio measured by the calipers of this defect.
	DefectClass	Gets the categories that describe the defect, specified as bitwise ORed flags defined by the CogBeadInspectDefectTypeConstants enumeration.
	EndCaliperIndex	Get the index of the last caliper that comprises this defect.
	EndPositionX	Gets the x-coordinate of the last point along the segment of the bead path where the defect was detected. This coordinate is specified in units defined by the image's SelectedSpaceName.
	EndPositionY	Gets the y-coordinate of the last point along the segment of the bead path where the defect was detected. This coordinate is specified in units defined by the image's SelectedSpaceName.
	LeftStepMax	Get the maximum step value measured by the calipers of this defect along the left edge of the bead. This measurement can help you to identify sharp fluctuations in the position of the edge.
	RightStepMax	Get the maximum step value measured by the calipers of this defect along the right edge of the bead. This measurement can help you to identify sharp fluctuations in the position of the edge.
	Size	Gets the length of the path between the first and last points along the segment of the bead path where the defect was detected. This length is specified in units defined by the image's SelectedSpaceName.
	StartCaliperIndex	Get the index of the first caliper that comprises this defect.
	StartPositionX	Gets the x-coordinate of the first point along the segment of the bead path where the defect was detected. This coordinate is specified in units defined by the image's SelectedSpaceName.
	StartPositionY	Gets the y-coordinate of the first point along the segment of the bead path where the defect was detected. This coordinate is specified in units defined by the image's SelectedSpaceName.
	WidthAvg	Get the average width ratio measured by the calipers of this defect. For each caliper the width ratio is computed by dividing the width measured at runtime by the width measured at train-time.
	WidthMax	Get the maximum width ratio measured by the calipers of this defect. For each caliper the width ratio is computed by dividing the width measured at runtime by the width measured at train-time.
	WidthMin	Get the minimum width ratio measured by the calipers of this defect. For each caliper the width ratio is computed by dividing the width measured at runtime by the width measured at train-time.

An instance of this class is returned by the Item Int32  property of the CogBeadInspectDefects class.

A defect is detected along sections of the bead path where multiple consecutive calipers (see: ConsecutiveFailingCalipersMin) fail for one or more of the following reasons:

• The bead width measured by the caliper is out of tolerance: the bead is wider than WidthMax or narrower than WidthMin.
• The bead coverage measured by the caliper is out of tolerance: the bead coverage is larger than CoverageMax or smaller than CoverageMin.
• The left or right edge of the bead steps sideways (perpendicular to the direction of the path), from one caliper to the next, by an amount that is larger than the StepThreshold.
• The left and/or right edge of the bead is missing (and not replaced by a fill edge).

For each defect, this class provides:

• The index of the first and last calipers that comprise the defect.
• The point on the bead path where the defect starts and ends.
• The arc length of the bead path between the start and end ponts.
• The area of the bead measured within the defect.
• The minimum, maximum, and average bead width measured by the calipers within the defect.
• The minimum, maximum, and average bead coverage measured by the calipers within the defect.
• The maximum step sideways from one caliper to the next for both the right and left edge of the bead.

For more information on the definition of a bead and bead path in this context, please refer to the remarks section of the CogBeadInspectPattern class.