ICogAcqRangeImage.FirstPixelLocation Property

ICogAcqRangeImage FirstPixelLocation Property

Cognex VisionPro 9.20

Reads or sets the offset of the output image relative to the center, in mm. Negative offsets are allowed. The default value corresponds to the leftmost location that can be seen at the furthest distance from the camera. Default value is negative, which indicates the left side of the center line.

Namespace: Cognex.VisionPro
Assembly: Cognex.VisionPro.Core (in Cognex.VisionPro.Core.dll) Version: 80.0.0.0

Syntax

C++

Copy to Clipboard Print

double FirstPixelLocation { get; set; }

double FirstPixelLocation { get; set; }

Property FirstPixelLocation As Double 
	Get 
	Set

Property FirstPixelLocation As Double 
	Get 
	Set

property double FirstPixelLocation {
	double get ();
	void set (double value);
}

property double FirstPixelLocation {
	double get ();
	void set (double value);
}

Property Value

Type: Double
Offset of the output image relative to the center, in mm.

Events

Event Type	Reason
ICogChangedEvent Changed	Fires when this property changes. The following state flag may be affected: SfFirstPixelLocation

Exceptions

Exception	Condition
ArgumentOutOfRangeException	If the supplied value is less than -FirstPixelLocationRange or greater than FirstPixelLocationRange.