Sets the PROFINET specific NDM settings.
Use this method to set the PROFINET Station Name.
Namespace: Cognex.VisionPro.CommAssembly: Cognex.VisionPro.Comm (in Cognex.VisionPro.Comm.dll) Version: 80.0.0.0
public virtual void SetProfinetConfig(
CogNdmProfinetConfig profinetConfig
)
public virtual void SetProfinetConfig(
CogNdmProfinetConfig profinetConfig
)
Public Overridable Sub SetProfinetConfig (
profinetConfig As CogNdmProfinetConfig
)
Public Overridable Sub SetProfinetConfig (
profinetConfig As CogNdmProfinetConfig
)
public:
virtual void SetProfinetConfig(
CogNdmProfinetConfig^ profinetConfig
)
public:
virtual void SetProfinetConfig(
CogNdmProfinetConfig^ profinetConfig
)
| Exception | Condition |
|---|
| ArgumentNullException |
Thrown if profinetConfig is null.
|
| CogFfpInvalidOperationException |
Thrown if the StationName is set to an invalid value.
EXAMPLE 1 “device-1.machine-1.plant-1.vendor”
EXAMPLE 2 “device-1.bögeholz“ is coded as “device-1.xn-bgeholz-90a“
-
1 or more labels, separated by [.]
-
Total length is 1 to 240
-
Label length is 1 to 63
-
Labels consist of [a-z0-9-]
-
Labels do not start with [-]
-
Labels do not end with [-]
-
The first label does not start with "port-xyz" or "port-xyz-abcde" with a,b,c,d,e, x, y, z = 0...9
-
Station-names do not have the form n.n.n.n, n = 0...999
-
Labels do only start with 'xn-' if RFC 3490 is applied
-
The definition of RFC 3490 shall be applied.
|