D905 Vision System Specifications
| Specifications | D905 | D905C |
|---|---|---|
| Minimum Firmware Requirement | In-Sight version 2.2.0. | In-Sight version 2.3.0. |
| Job/Program Memory | 16GB non-volatile flash memory; unlimited storage via remote network device. | |
| Image Processing Memory | 3GB SDRAM | |
| SD Card |
1 Micro SD card slot with an 8GB SD card pre-installed for saving job and image files. The vision system supports:
|
|
| Sensor Type | 2/3-inch CMOS, global shutter | |
| Sensor Properties | 11.1mm diagonal, 3.45 x 3.45µm sq. pixels | |
| Maximum Image Resolution (pixels) | 2448 x 2048 | |
| Electronic Shutter Speed | 21µs to 1000ms | |
| Acquisition | Rapid reset, progressive scan, full-frame integration. High Dynamic Range (HDR+) available. | Rapid reset, progressive scan, full-frame integration. |
| Bit Depth | 256 grey levels (8 bits/pixel) | 24-bit color |
| Frames Per Second (FPS)1 | 26 FPS | 16 FPS |
| Lens Type |
C-Mount or S-Mount/M12 Note: For the In-Sight D905, the S-Mount/M12 lens image circle size is smaller than the vision system’s image sensor size, resulting in mechanical vignetting in the image when using any S-Mount/M12 lens. Therefore, S-Mount/M12 lenses are not recommended. For more information, see Mechanical Vignetting.
|
|
| Trigger | 1 opto-isolated, acquisition trigger input. | |
| Discrete Inputs |
3 general-purpose inputs when connected to the Breakout cable.2 |
|
| Discrete Outputs |
4 high-speed outputs when connected to the Breakout cable.3 |
|
| Status LEDs | SD Card Status, Pass/Fail LED and Indicator Ring, Network LED and Error LED. | |
| Internal LED Ring Light | White, Red, Blue or IR LED ring light used with the illumination accessory (ISLM-7000-xxx).
Note: For color vision systems, the white LED ring light should be used. |
|
| In-Sight Illumination Accessory (ISLM‑7000‑xxx) | Cover is compliant with ANSI Z87.1-2003 Drop-Ball Impact Test (no fracture, 25.4mm diameter steel ball, vertical drop from 127cm). | |
| In-Sight Autofocus Module Accessory (ISAF‑7000‑8mm) | Number of Focus Cycles: 20,000 Note: For the In-Sight D905, the S-Mount/M12 lens image circle size is smaller than the vision system’s image sensor size, resulting in mechanical vignetting in the image when using any S-Mount/M12 lens. Therefore, S-Mount/M12 lenses are not recommended. For more information, see Mechanical Vignetting. |
|
| Network Communication | 1 Ethernet port, 10/100/1000 BaseT with auto MDIX. IEEE 802.3 TCP/IP Protocol. Supports DHCP, static and link-local IP address configuration. | |
| Power Consumption | 24VDC ±10%, 1.5A maximum. Note: This product can have repetitive surges with high peak currents. A power source rated for at least 5A continuous current is required to supply these surges and prevent the product from operating unreliably. |
|
| Power Output | 24VDC @ 750mA maximum to external light. | |
| Material | Die-cast and extruded aluminum housing. | |
| Finish | Painted. | |
| Mounting | Four M4 threaded mounting holes on front and back of the vision system. | |
| Dimensions |
|
|
| Weight |
|
|
| Case Temperature4 | 0°C to 65°C (32°F to 149°F) | |
| Storage Temperature | -20°C to 80°C (-4°F to 176°F) | |
| Humidity | < 80% non-condensing | |
| Protection | IP67 with all cables properly attached (or the provided connector plug installed), the IP67-rated cover properly installed, and the Micro SD card cover fastened in place. | |
| Shock (Shipping and Storage) | IEC 60068-2-27: 18 shocks (3 shocks in each polarity in each (X, Y, Z) axis) 80 Gs (800m/s2 at 11ms, half-sinusoidal) with cables or cable plugs and a 150 gram or lighter lens attached. | |
| Vibration (Shipping and Storage)5 | IEC 60068-2-6: vibration test in each of the three main axis for 2 hours @ 10 Gs (10 to 500 Hz at 100m/s2 / 15mm) with cables or cable plugs and a 150 gram or lighter lens attached. | |
| Regulations/Conformity | CE, FCC, KCC, TÜV SÜD NRTL, EU RoHS, China RoHS | |