Standard Components
The vision system is shipped with the components listed below.
| Component | M12 Lens Configuration | C-Mount Lens Configuration |
| Vision System | X | X |
| Lens Cover Kit (includes lens cover and O-Ring) | X | X |
| Mounting Kit | X |
Standard Components Descriptions
| Component | Description |
|---|---|
|
Vision System (P/N 821-0084-5R) (P/N 821-0084-6R) (P/N 821-0084-7R) (P/N 821-0100-3R) (P/N 821-0100-4R) (P/N 821-0100-5R) |
Provides vision processing, job storage, serial and Ethernet connectivity and discrete I/O. |
|
Lens Cover Kit (P/N 820-0277-1R) (P/N 820-0277-2R) |
Includes lens cover and O-Ring. Provides environmental protection for the lens. |
|
Mounting Kit (P/N 823-0192-1R) |
Includes a mounting bracket and M3 screws (quantity 4) for mounting the vision system and securing it to a mounting surface. |
Note:
- There are two lens configurations available for the vision system: an M12 lens configuration and a C-Mount lens configuration. If you purchased a vision system with the M12 lens configuration, the vision system is shipped with the pre-installed lens and ring light. If you purchased a vision system with the C-Mount lens configuration, the lens is not included in the box and must be purchased as an optional component.
- Optional components are available for purchase separately. For a list of options and accessories, contact your Cognex sales representative. For optional components installation instructions, refer to the In‑Sight® 7000 Series Vision System Optional Configurations, available for download on the In-Sight support site: cognex.com/support/insight.