In-Sight Ports

The following ports are used for In-Sight communications:

Port Number	Service
TCP 21	FTP. For more information, see FTP Settings Dialog.
TCP 23	Telnet. For more information, see Dynamic Host Configuration Protocol (DHCP) Server.
UDP 68	DHCP (In-Sight vision system only)
TCP 502	Modbus
TCP 1069	In-Sight Protocol
UDP 1069	In-Sight Discovery
TCP 1070	Machine Status data. For more information, see Sensor Status View.
UDP 2222	EtherNet/IP
TCP 5753	Audit Message Server
TCP 8087	Web HMI HTTP (Default)
TCP 8443	Web HMI HTTPS (Default)
UDP 45237	Base SLMP messaging (GetCommunicationSetting). For more information, see Configure In-Sight Vision Systems for SLMP Scanner Communications.
TCP 44818	EtherNet/IP
UDP 44818	EtherNet/IP
UDP 45237	iQ Sensor Solution. For more information, see Communicate with a Mitsubishi Automation Controller via iQ Sensor Solution.
TCP 50000	DataChannel. For more information, see DataChannel Communications.
UDP 61450	CC-Link IE Field Basic: Cyclic request/response messages. For more information, see Communicate with a Mitsubishi Automation Controller on CC-Link IE Field Network Basic.
UDP 61451	CC-Link IE Field Basic: NodeSearch and IPAddressSet messages. For more information, see Communicate with a Mitsubishi Automation Controller on CC-Link IE Field Network Basic.