Vision System Specifications
| Specifications |
In-Sight 7010/7020/7050/7200/ 7210/7230/7400/7410/7430 |
In-Sight 7010C/7200C/7400C |
In-Sight 7402/7412/7432 |
In-Sight 7402C |
|---|---|---|---|---|
| Minimum Firmware Requirement | In-Sight Version 4.9.0 | |||
| Job/Program Memory | 512MB non-volatile flash memory; unlimited storage via remote network device. | |||
| Image Processing Memory | 256MB SDRAM | |||
| Sensor Type | 1/1.8-inch CMOS | |||
| Sensor Properties | 5.3mm diagonal, 5.3 x 5.3µm sq. pixels | 8.7mm diagonal, 5.3 x 5.3µm sq. pixels | ||
| Maximum Resolution (pixels)1 | 800 x 600 | 1280 x 1024 | ||
| Electronic Shutter Speed | 16µs to 950ms | |||
| Acquisition | Rapid reset, progressive scan, full-frame integration. | |||
| Bit Depth | 256 grey levels (8 bits/pixel) | 24-bit color | 256 grey levels (8 bits/pixel) | 24-bit color |
| Frames Per Second2 | 102 full frames per second. | 50 full frames per second. | 60 full frames per second. | 30 full frames per second. |
| Lens Type | M12 or C-Mount. | |||
| Trigger | 1 opto-isolated, acquisition trigger input. Remote software commands via Ethernet and RS-232C. | |||
|
Discrete Inputs |
3 general-purpose inputs when connected to the Breakout cable. (Eight additional inputs available when using the optional CIO-MICRO or CIO-MICRO-CC I/O module.) |
|||
|
Discrete Outputs |
4 high-speed outputs when connected to the Breakout cable. (Eight additional outputs available when using the optional CIO-MICRO or CIO-MICRO-CC I/O module.) |
|||
| Status LEDs | Network link and activity, power and 2 user-configurable. | |||
| Internal LED Ring Light |
Red, Green, Blue, White, IR (M12 lens configuration only).
|
|||
| Network Communication |
Ethernet port, 10/100 BaseT with auto MDI/MDIX. IEEE 802.3 TCP/IP protocol. Supports DHCP (factory default), static and link-local IP address configuration. |
|||
| Serial Communication | RS-232C: 4800 to 115,200 baud rates. | |||
| Power Consumption | 24VDC ±10%, 2.0 amp. | |||
| Material | Aluminum housing. | |||
| Finish | Painted. | |||
| Mounting | Four M3 threaded mounting holes (1/4 - 20, M6 and flathead mounting holes also available on mounting bracket). | |||
| Lens Cover View Port Material | Clear, hard-coated optical grade acrylic precision sheet with scratch-resistance coating on both sides. | |||
| M12 Lens Configuration Dimensions |
55mm (2.17in) x 84.8mm (3.34in) x 55mm (2.17in) |
|||
|
C-Mount Lens Configuration Dimensions |
75mm (2.95in) to 83mm (3.27in) x 84.8mm (3.34in) x 55mm (2.17in) with lens cover installed. |
|||
|
42.7mm (1.68in) x 84.8mm (3.34in) x 55mm (2.17in) without lens cover installed. |
||||
| Weight | 220 g (7.8 oz.) with lens cover and typical M12 lens installed. | |||
| Operating Temperature |
0°C to 45°C (32°F to 113°F) |
|||
| Storage Temperature | -30°C to 80°C (-22°F to 176°F) | |||
| Humidity | 90%, non-condensing (Operating and Storage) | |||
| Protection | IP67 with lens cover properly installed. | |||
| Shock (Shipping and Storage) | 80 G Shock per IEC 60068-2-27. | |||
| Vibration (Shipping and Storage) | 10G from 10-500Hz with a 50 gram or lighter lens per IEC60068-2-6, FC (C-Mount lens configuration only). | |||
| Regulatory Compliance | CE, FCC, KCC, TÜV SÜD NRTL, EU RoHS | |||