In-Sight Ports
The following ports are used for In-Sight communications:
| Port Number | Service |
|---|---|
| TCP 21 | FTP. For more information, see FTP Settings Dialog. |
| TCP 23 | Telnet. For more information, see Dynamic Host Configuration Protocol (DHCP) Server. |
| UDP 68 | DHCP (In-Sight vision system only) |
| TCP 80 | HTTP |
| TCP 502 | Modbus |
| TCP 1069 | In-Sight Protocol |
| UDP 1069 | In-Sight Discovery |
| TCP 1070 | Machine Status data. For more information, see Sensor Status View. |
| UDP 2222 | EtherNet/IP |
| TCP 5753 | Audit Message Server |
| UDP 45237 | Base SLMP messaging (GetCommunicationSetting). For more information, see Configure In-Sight Vision Systems for SLMP Scanner Communications. |
| TCP 44818 | EtherNet/IP |
| UDP 44818 | EtherNet/IP |
| UDP 45237 | iQ Sensor Solution. For more information, see Communicate with a Mitsubishi Automation Controller via iQ Sensor Solution. |
| TCP 50000 | DataChannel. For more information, see DataChannel Communications. |
| UDP 61450 | CC-Link IE Field Basic: Cyclic request/response messages. For more information, see Communicating with a Mitsubishi Automation Controller on CC-Link IE Field Network Basic. |
| UDP 61451 | CC-Link IE Field Basic: NodeSearch and IPAddressSet messages. For more information, see Communicating with a Mitsubishi Automation Controller on CC-Link IE Field Network Basic. |