Set Up Image

The Set Up Image step is used to acquire or load an image, adjust the In-Sight sensor's acquisition settings, and, if your application requires results in real world units, such as millimeters or inches, you can calibrate the image's pixel coordinates.

• Acquiring or Loading an Image
• Adjusting the Acquisition Settings

• Calibrating the Image to Real World Units (In-Sight Vision Systems)

  Note: This topic describes the calibration feature when connected to an In-Sight vision system. If connected to an In-Sight 2000-130/130C or 2000-23M vision sensor, refer to the Field of View (Width) section of Image Settings.