DataMan 360 Series Imager Specifications

Specification DataMan 360 Series Imager
Image Sensor 1/1.8 inch CMOS
Image Sensor Properties

6.9 mm x 5.5 mm (H x V); 5.3 µm square pixels (DataMan 360 and 362 ), 4.5 µm square pixels (DataMan 363)

Image Resolution (pixels)
  • DataMan 360: 800 x 600
  • DataMan 362: 1280 x 1024
  • Dataman 363: 1600 x 1200
Electronic Shutter Speed
  • minimum exposure: 5 µs (DataMan 360 and 362), 12 µs (DataMan 363)
  • maximum exposure: 1000 µs with internal illumination/100000 µs with external illumination
Image Acquisition at Full Resolution
  • DataMan 360 and 362: up to 60 fps
  • DataMan 363: up to 40 fps
Lens Type
  • S-Mount 10.3 mm F:5 (with optional liquid lens) with IR blocking filter
  • S-Mount 16 mm F:9, no IR blocking filter
  • C-Mount 24 mm F:6 (with liquid lens only) with IR blocking filter
  • S-Mount 25 mm M12 lens, no IR blocking filter
  • C-Mount lenses (with limitations, see below)

Limitations to C-Mount lenses:

  • The length of the thread may not exceed 5.4 mm.
  • For a chosen lens, the distance from the C-mount shoulder to the bottom of the lens may not exceed 5.4mm. Possibly a lens spacer is required.
  • When using the C-Mount lens cover, lens dimensions including spacer and filters may not exceed 32 x 42 mm (diameter x length).

To avoid accelerated aging of built-in illumination LEDs, which results in light intensity degradation, consider the following duty cycle limits above 25°C (77°F):

  • at 35°C (95°F): 4% duty cycle, for example, 750 µs exposure and 18493 µs interval
  • at 45°C (113°F): 2% duty cycle, for example, 350 µs exposure and 18093 µs interval or 1000 µs exposure and 50000 µs interval