DataMan 280
Series Reader
| Specification |
DataMan 280 DataMan 280 EC |
DataMan 282 |
||
|---|---|---|---|---|
| Weight |
6.2 mm: 141 g 16 mm: 169 g Right angle configuration adds 50 g |
HPIT: 290 g Right angle configuration adds 50 g |
||
| Power |
24 V DC +/- 10% |
24 V DC ± 10% |
||
| 24 V Supply |
24 V DC ± 10% LPS or NEC class 2 |
|||
|
Power consumption without USB device attached:
|
Power consumption:
|
|||
| Power over Ethernet Supply |
PoE Class 3 N/A |
N/A | ||
| Operating Temperature |
0–40°C (32–104°F) |
|||
| Storage Temperature |
-10–60°C (14–140°F) |
|||
| Humidity | <95% non-condensing | |||
| Environmental |
IP67 Note: IP67 rating applies only if all blind plugs and cables are attached properly, or the provided connector plug is installed. Also, make sure that the IP67-rated cover is installed properly.
|
|||
| Shock |
IEC 60068-2-27 - 500 shocks in each polarity of each (X, Y, and Z) axis, 3000 shocks total, semi-sinusoidal, 11 g, 10 ms |
|||
| Shock (Shipping and Storage) |
ISTA-1A Standardized Testing - Packaged Products 150 lb or less |
|||
| Vibration | IEC 60068-2-6: vibration test in each of the three main axis for 2 hours @ 10 Gs (10 to 500 Hz at 100m/s2 / 15 mm) | |||
| Vibration (Shipping and Storage) |
FedEx Vibration Testing for packaged products 150 lbs or less |
|||
| RS-232 | RxD, TxD according to TIA/EIA-232-F | |||
| Codes |
1-D barcodes: Codabar, Code 39, Code 128, Code 93, Code 25, Interleaved 2 of 5, Postal Codes, UPC/EAN/JAN, MSI 2-D barcodes: Data Matrix (IDMax and IDQuick: ECC 0, 50, 80, 100, 140, and 200), QR Code, microQR, PDF 417, AztecCode, DotCode, MaxiCode |
|||
| High-Speed Outputs 0, 1 |
IMAX: 50 mA |
|||
|
VOL: ≤ ± 3 V @ 50 mA |
||||
| Inputs 0 (Trigger), 1 |
VIL: ≤ ± 6 V |
|||
|
VIH: ≥ ± 12 V |
||||
|
ITYP: 4.2 mA @ 24 V |
||||
| Ethernet |
10/100/1000. Full duplex or half duplex. |
|||
| EtherCAT |
N/A for DataMan 280 and 282 For details on the EtherCAT interface, see Connecting the EtherCAT Cable to the DataMan 280 EtherCAT Reader. |
|||