Connect with Bluetooth Direct Connect of your Mobile Device Bluetooth Application

1. Power up the reader.
2. Activate discoverable mode on your reader by either navigating to Settings > Communications > Connect > BT Device on the reader screen, or scanning the Bluetooth Discoverable ON configuration code.

3. Enable HID Result on your reader by navigating to Settings > Communications > HID ON/OFF, or using the Enable HID mode configuration code.

   Note: The HID ON/OFF menu only appears on the reader screen, if you have an active Bluetooth connection, or the reader is paired with a Base Station.
4. Open the Bluetooth application of your device OS, and initiate a Bluetooth search, and add your reader.

In HID mode, the reader acts as a keyboard. This means that the reader sends the read barcodes as keyboard key presses. Make sure that the keyboard language set on the reader is the same language as the keyboard language configured on the mobile device, otherwise the content of the barcodes you read appears as unexpected characters. If you see a delay in getting results or the wrong results, check the language setups and other HID options of your reader.