DataMan 280 Series Reader

Specification

DataMan 280

DataMan 282

Weight

6.2 mm: 141 g

16 mm: 169 g

Right angle configuration adds 50 g

HPIT: 290 g

Right angle configuration adds 50 g

Power

24 V DC +/- 10%, PoE (Power over Ethernet)

24 V DC ± 10%

24 V Supply

24 V DC ± 10%

LPS or NEC class 2

24 V DC ± 10%

Power consumption without USB device attached:

  • Average ≤ 5 W using High-Powered Light
  • Average ≤ 6 W using High Frequency High-Powered Light
  • Peak ≤ 1.6 A using internal illumination

Power consumption:

≤ 7,5 W

Power over Ethernet Supply PoE Class 3 N/A
Operating Temperature

0–40 °C (32–104 °F)

Storage Temperature

-10–60 °C (14–140 °F)

 

Humidity <95% non-condensing
Environmental

IP67

Note: IP67 rating applies only if all blind plugs and cables are attached properly, or the provided connector plug is installed. Also make sure that the IP67-rated cover is installed properly.
Shock

IEC 60068-2-27 - 500 shocks in each polarity of each (X, Y, and Z) axis, 3000 shocks total, semi-sinusoidal, 11 g, 10 ms

Shock (Shipping and Storage)

ISTA-1A Standardized Testing - Packaged Products 150 lb or less

Vibration IEC 60068-2-6: vibration test in each of the three main axis for 2 hours @ 10 Gs (10 to 500 Hz at 100m/s2 / 15 mm)
Vibration (Shipping and Storage)

FedEx Vibration Testing for packaged products 150 lbs or less

 

RS-232 RxD, TxD according to TIA/EIA-232-F
Codes

1-D barcodes: Codabar, Code 39, Code 128, Code 93, Code 25, Interleaved 2 of 5, Postal Codes, UPC/EAN/JAN, MSI

2-D barcodes: Data Matrix (IDMax and IDQuick: ECC 0, 50, 80, 100, 140, and 200), QR Code, microQR, PDF 417, AztecCode, DotCode, MaxiCode

 

High-Speed Outputs

0, 1, 2, 3

IMAX: 50 mA

VOL: ≤ ± 3 V @ 50 mA

 

Inputs

0 (Trigger), 1, 2, 3

VIL: ≤ ± 6 V
VIH: ≥ ± 12 V

 

ITYP: 4.2 mA @ 24 V

 

Ethernet 10/100/1000. Full duplex or half duplex.